230V ledstrips

230v ledstrips you can fit anywhere they can be in width. They are easily mounted with special mounting clips and can be set up both indoors and outdoors in lengths from 2 to 100 metres. They can be mounted on curved, slanted and other surfaces where it would not otherwise be possible to install traditional light sources. Although LED strips do not require the connection of a transformer, a special plug is needed at one end and a special termination piece at the other. Several pieces can be put one after the other, just as they can be shortened for each meter. If you order several copies of the same part number, they will be delivered in a bundle . If you need further advice and guidance before choosing a led strip, please contact our friendly customer service by phone or e-mail. If you are not sure that this led strip is the right solution, check out the many other
230v length
230v LED strips we carry here at LEDproof.

Important info about 230v ledstrips

It doesn't take much space to install a 230v ledstrip. Just wide enough for you to attach the mounting clips to each side, you can put up LED lights. This opens up a whole new range of possibilities for putting up lights in places where there would otherwise be no room for a traditional solution.
The 230-volt version is also more robust than the 12-volt version in particular. This makes them ideal for outdoor use, where they can be placed virtually anywhere, as long as they are not directly in water. For example, place them along the eaves of your house to provide effective and practical lighting for both the facade and any nearby walkways, or to create attractive and effective lighting around the entrance area.

For places where good, uniform light is needed

230v LED strips can be used anywhere where good, uniform and colourfast light is needed. Because unlike fluorescent tubes and light bulbs, LED strips give off the same shade and luminous flux (lm), no matter how long they've been on. There's no need for them to heat up or change colour if they get too hot. It's the same light and colour all the time.
This makes them ideal for kitchen table lighting, lighting over machines and work tables or anywhere else good light is needed. At the same time, 230v LED strips don't get nearly as hot as halogen bulbs, for example, and can therefore be installed in places where you wouldn't otherwise be able to install lights because of fire hazards.

Protect your 230v LED strips with LED rails

Although LED strips can withstand water splashes, it can be a good idea to protect them from, for example, grease splashes or splashes from chemical or sticky liquids by mounting them in LED rails. This also allows you to install LED strips in places where you can't fit the special mounting clips or run them over an area where they can't be fixed to anything. It'll

be a long time before you need to replace your 230v LED strips

LED strips use only a fraction of the power that traditional lighting needs. So from day one, you'll save money on your electricity bill. Plus, a set of 230v LED strips can easily stay on for over 20,000 hours before needing to be replaced. This means that it can be many years before they need replacing.
So with 230v LED strips you save on both the cost of electricity and lighting materials.